Avaya Communication Manager Administrator's Manual page 1013

Ringing
Use this field to control the LED color and flash rate while a call is ringing.
Note:
This field only applies to 8400 and 6400 series phones. The 2400 series phone
Note:
uses icons rather then LEDs. Correct operation in the Japanese environment
requires the administrator to select the values red and wink for this field. The
default values are green and flash.
Valid entries
green or red
off
wink
inverse-wink
flash
flutter
broken-flutter
steady
Idle
Use this field to control the LED of a station that is idle. The default value is steady.
Note:
This field only applies to 8400 and 6400 series phones. The 2400 series phone
Note:
uses icons rather then LEDs. This value controls the red LED. Correct operation
in the Japanese environment requires the administrator to select the value off for
this field.
Valid entries
steady
off
Usage
Indicate the LED color.
Indicate the flash rate.
Usage
Default. LED is on.
LED is off.
Feature-Related System Parameters
Issue 1 June 2005 1013