Avaya Communication Manager Administrator's Manual page 1234

Screen Reference
Outgoing Shuttle Exchange Cycle Timer (sec)
Appears when the Incoming Call Type field is group-ii-mfc or non-group-ii-mfc and the
Outgoing Call Type field is group-ii-mfc or none on the Multifrequency-Signaling-Related
System Parameters screen. This field applies only to multifrequency signaling calls made from
Avaya Communication Manager.
Valid entries
1 to 25
Upper Bound (msec)
Specifies the upper bound of the flashhook interval. Specifies the upper bound of the
station-to-switch recall signal timing interval in milliseconds. Appears when the Flashhook
Interval field is y.
Valid entries
80 to 1250 (in
increments of
10).
1234 Administrator Guide for Avaya Communication Manager
Usage
Enter the number of seconds to time an exchange
cycle (starts when the far end requests a digit until
Avaya Communication Manager sends the requested
digit).
Usage
A flash of 50 msec to 130 msec is always acceptable
from a 2500-type set regardless of the setting of the
Upper and Lower bounds and will be treated as the
digit one.