Avaya Communication Manager Administrator's Manual page 1182

Screen Reference
Port
This is a display-only field. It shows the port number to which parameters administered on the
row apply.
Side
Valid entries
a
b
Synch Source
The Synch Source field applies only for TN2185 boards.
Note:
For MM720 and MM722 bri media modules, the Synch Source field does not
Note:
appear. For the MM720 and MM722, this parameter is configured using the
gateway CLI.
Valid entries
y
n
T3 Timer Length (sec)
Valid entries
1 to 127
1182 Administrator Guide for Avaya Communication Manager
Usage
Determines how glare conditions are handled when
Interface field is peer-slave.
Usage
When set to y, allows a TN2185 board displayed on the
Synchronization Plan screen to be entered as the
Primary or Secondary synchronization source, if at least
one of the ports on that board has Synch Source?
enabled. Only those ports marked y are candidates for
clock synchronization with the far-end network.
Usage
Tells the TE side how long to wait, in seconds, for an
inactive Layer 1 to become active.