Avaya Communication Manager Administrator's Manual page 1109

IP Audio Hairpinning
Allows IP endpoints to be connected through the IP circuit pack in the server.
Valid entries
y/n
Location
Specifies the location of the IP network region, allowing correct date and time information, and
trunk routing based on IP network region.
Note:
If the Multinational Locations feature is enabled, and IP phones derive their
Note:
network region from the IP Network Map, you must administer this field with a
valid value (1 to 250). This allows the IP endpoint to obtain a VoIP resource.
Valid entries
1 to 44
1 to 250
blank
Usage
Enter y to allow IP endpoints to be connected through
the media server's IP circuit pack in IP format, without
first going through the Avaya DEFINITY TDM bus.
Usage
(For CSI only.) Enter the number for the location for
the IP network region. The IP endpoint uses this as
its location number. This applies to IP telephones
and softphones.
(For Avaya S8300 Media Server, Avaya S8700
Series Multi-Connect, and Avaya S8700 Series
IP-Connect only.) Enter the number for the location
for the IP network region. The IP endpoint uses this
as its location number. This applies to IP telephones
and softphones.
The location is obtained from the cabinet containing
the CLAN or the media gateway that the endpoint
registered with.
IP Network Region
Issue 1 June 2005 1109