DS1 Echo Cancellation
Reduces voice call echo.
Note:
Changes to the DS1 Echo Cancellation field do not take effect until one of the
Note:
following occurs:
Port is busied-out/released
●
Trunk group is busied-out/released
●
SAT command test trunk group is performed
●
Periodic maintenance runs
●
Valid entries
y/n
DSN Term
Valid entries
y/n
Glare Handling
This field determines what Communication Manager will do when glare occurs. This field
appears when the Direction field is two-way and the outgoing side of the Trunk Type field is
either .../wink or .../delay.
If you enter control or backoff, and ports for the trunk group are not capable of detecting glare,
warnings are generated. The following circuit packs can detect glare: TN767 (all releases),
TN760C (or later releases), and TN464C (or later releases).
Valid entries
control
backoff
none
Usage
Enter y to allow echo cancellation on a per port basis.
Usage
Use the DSN Term field to identify the trunk group as a
DSN termination telephone. The default is n.
Usage
Communication Manager will seize the trunk and proceed with call
setup. The other switch will find another trunk.
The other server or switch will seize the trunk and proceed with call
setup. Your server/switch will find another trunk.
Trunk Group
Issue 1 June 2005
1581