Avaya Communication Manager Administrator's Manual page 1417

Hide thumbs Also See for Communication Manager:
Table of Contents

Advertisement

LWC Reception
Valid entries
audix
none
spe
Mapping Mode
Controls the mode of operation in which the cell telephone will operate when mapped to this
XMOBILE extension. An XMOBILE station can be bridged to a deskset. These restrictions/
modes exist because the COR of a bridge is ignored; instead the principal's COR is used. This
field allows an XMOBILE station to function as a bridge and still be restricted.
When a cell telephone is mapped to more than one XMOBILE station, then only one of the
mapped XMOBILE station may have origination or both as its Mapping Mode. Therefore, only
one of the XMOBILE stations mapped to the cell telephone number is permitted to originate
calls.
Valid entries
both
none
origination
termination
Usage
Enter audix if the messages are stored on the Audio
Information Exchange System.
Enter none if LWC messages will not be stored.
Enter spe if LWC messages are stored in the system or on
the switch processor element (spe).
Usage
The cell telephone can be used to originate and
terminate calls from its associated XMOBILE
extension. This is the default when the XMOBILE
Type field is PHS or DECT.
The XMOBILE station is disabled administratively
and cannot originate and terminate calls from its
associated internal extension.
The cell telephone may be used only to originate
calls from its associated internal XMOBILE
extension by dialing into the office server running
Communication Manager.
The cell telephone may be used only to terminate
calls from its associated internal XMOBILE
extension. This is the default when the XMOBILE
Type field is EC500.
Station
Issue 1 June 2005
1417

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents