Avaya Communication Manager Administrator's Manual page 1531

Field descriptions for page 1
440Hz PBX-dial Tone
Specifies whether the switch (primary) dial tone will be changed to a continuous 440Hz/-17
tone.
Valid entries
y/n
440Hz Secondary-dial Tone
Specifies whether the Secondary (CO) dial tone will be changed to a continuous 440Hz/-17
tone.
Valid entries
y/n
Base Tone Generator Set
The country code identifies the base tone generation set to be used. For information on the
appropriate tone-generation hardware to use in a specific country, see Hardware Guide for
Avaya Communication Manager, 555-245-207.
Valid entries
1 to 25
Usage
A value of n implies the tone will either be
administered on a later page of this screen or, if no
individual definition is administered, as defined in
Base Tone Generation Set.
Usage
A value of n implies the tone will either be
administered on a later page of this screen or, if no
individual definition is administered, as defined in
Base Tone Generation Set.
Usage
See the Country code table
System-Parameters Country-Code screen
description.
Tone Generation
at the beginning of the
Issue 1 June 2005 1531