Avaya Communication Manager Administrator's Manual page 1555

Incoming Calling Number - Format
This field indicates the TON/NPI encoding applied to CPN information modified by the CLI
Prefix feature. This encoding does not apply to calls originating locally. The Numbering Format
field on page 2 of this screen applies to calls originated from this server running Communication
Manager.
If this field is blank, Avaya Communication Manager passes on the encoding received in the
incoming setup message. If the incoming setup message did not contain CPN information and
digits are added, the outgoing message will contain these digits. If the Format field is blank in
this case, the value defaults to pub-unk.
If the Format field on page 2 of this screen is also administered as unknown, the trunk group is
modified to "unk-unk" encoding of the TON/NPI. Therefore, this field also must contain a value
other than unknown.
Note:
The values for this field map to the Type of Numbering (TON) and Numbering
Note:
Plan Identifier (NPI) values shown below.
Valid entries
blank
natl-pub
intl-pub
locl-pub
pub-unk
lev0-pvt
lev1-pvt
lev2-pvt
unk-unk
Type of Numbering plan identifier
numbering (TON) (NPI)
incoming TON incoming NPI unmodified
unmodified
national(2) E.164(1)
international(1) E.164(1)
local/subscriber(4) E.164(1)
unknown(0) E.164(1)
local(4) Private Numbering Plan -
PNP(9)
Regional Level Private Numbering Plan -
1(2) PNP(9)
Regional Level Private Numbering Plan -
2(1) PNP(9)
unknown(0) unknown(0)
Trunk Group
Issue 1 June 2005 1555