Avaya Communication Manager Administrator's Manual page 1544

Screen Reference
Cyclical Hunt
When a call is offered to a trunk group, Communication Manager searches for an available
trunk. This field, which appears when the Direction field is two-way and the Trunk Type field is
loop-start, controls the starting point of this search.
You can change this field from n to y at any time. To change from y to n, however, all the trunks
in the group must be idle or busied out.
Valid entries
y
n
Dial Access
This field controls whether users can route outgoing calls through an outgoing or two-way trunk
group by dialing its trunk access code. Allowing dial access does not interfere with the operation
of AAR/ARS.
!
SECURITY ALERT:
Calls dialed with a trunk access code over WATS trunks bypass AAR/ARS and
SECURITY ALERT:
aren't restricted by facility restriction levels. For security, you may want to leave
the field set to n unless you need dial access to test the trunk group.
Valid entries
y
n
1544 Administrator Guide for Avaya Communication Manager
Usage
Enter y to have Communication Manager start its
search from the last trunk seized. This method is faster,
and thus better suited for high-traffic trunk groups.
Enter n to have Communication Manager start each
search at member 1 (the first trunk administered on the
Group Member Assignments page).
Usage
Allows users to access the trunk group by dialing its
access code.
Does not allow users to access the trunk group by
dialing its access code. Attendants can still select this
trunk group with a Trunk Group Select button.