Avaya Communication Manager Administrator's Manual page 1272

Screen Reference
Default ANI
This field appears only when Outgoing Call Type is group-ii-mfc or mfe.
Valid entries
2 to 15
blank
ANI Prefix
This field appears only when Outgoing Call Type is group-ii-mfc or mfe.
Valid entries
1 to 6 digits or
blank
Backward Cycle Timer (sec)
Appears when the Incoming Call Type field is mfe.
Valid entries
1 to 255
Collect All Digits Before Seizure
Appears when the Outgoing Call Type is group-ii-mfc or mfe.
Valid entries
y
n
1272 Administrator Guide for Avaya Communication Manager
Usage
Enter the PBX identification number that is sent to the CO
when ANI is requested (by the CO) on a particular call but
is not available, such as on tandem tie trunk calls.
Use for tandeming. If this field is blank, you must enter a
value in the ANI-Not-Available field.
Usage
Enter the prefix to apply to an extension when ANI is sent
to the CO.
Usage
Enter the number of seconds to wait to send the check
frequency after receiving an MFE signal.
Usage
The system collects all the digits before seizing the
trunk and the ANI Req field on the AAR and ARS Digit
Conversion Table does not apply.
Enter n to control ANI collection via the ARS screens.