Avaya Communication Manager Administrator's Manual page 1540

Screen Reference
Call Still Held
This field appears if the Group Type field is co or fx. This field is used when the receiving end
media server or switch initiates the disconnection of incoming calls. It effectively extends the
Incoming Glare Guard timer by 140 seconds. This field affects only TN438B, TN465B, and
TN2147 ports and is used primarily when the Country Code field is 2.
Valid entries
y/n
CDR Reports
Valid entries
y
n
r (ring-intvl)
Note:
For ISDN trunk groups, the Charge Advice field affects CDR information. For
Note:
CO, DIOD, FX, and WATS trunk groups, the PPM field affects CDR information.
1540 Administrator Guide for Avaya Communication Manager
Usage
Enter y to prevent glare by delaying an outgoing seizure
of a trunk for at least 140 seconds after it is released
from an incoming call.
Usage
All outgoing calls on this trunk group will generate call
detail records. If the Record Outgoing Calls Only field
on the CDR System Parameters screen is n, then
incoming calls on this trunk group will also generate call
detail records.
Calls over this trunk group will not generate call detail
records.
CDR records will be generated for both incoming and
outgoing calls. In addition, the following ringing interval
CDR records are generated:
Abandoned calls: The system creates a record
●
with a condition code of "H," indicating the time
until the call was abandoned.
Answered calls: The system creates a record with
●
a condition code of "G," indicating the interval
from start of ring to answer.
Calls to busy stations: The system creates a
●
record with a condition code of "I," indicating a
recorded interval of 0.