Avaya Communication Manager Administrator's Manual page 1180

Screen Reference
Field descriptions for page 1 (with a TN2185 circuit pack)
Cntry/Peer Protocol
Tells call processing software which ISDN protocol standard is applied.
Valid entries
1 to 25
etsi
QSIG
blank
DCP/Analog Bearer Capability
Valid entries
3.1kHz
speech
Detect Slips
Valid entries
y/n
1180 Administrator Guide for Avaya Communication Manager
Usage
When this field is 10, 12, 13, or etsi, the Protocol
Version field is equivalent to b on the DS1 Circuit
Pack screen. When the Cntry/Peer Protocol field is
set 10, 12, 13, or etsi, set the Provol Version field to
b. For all other administered values, the Protocol
Version sets to a.
When the Interface field is peer-slave or peer-master,
this field must be QSIG. The choice QSIG is valid only
when the Interface field is peer-slave.
You cannot leave this field blank if the Interface field is
set to a valid, non-blank value
Usage
Indicates how to encode the Bearer Capability IE for an
outgoing call originated by a DCP or analog endpoint.
Usage
Tells maintenance software whether slips reported by
the BRI port should be logged.