Avaya Communication Manager Administrator's Manual page 1598

Screen Reference
Incoming Disconnect (msec)
The field appears only when the Direction field is incoming or two-way and the Trunk Type
field is either blank or cont.
Valid entries
50 to 2550 in
increments of 10
Incoming Disconnect Send (msec)
This field is only administrable if the Trunk Type field is dis and the trunk group Direction field
is incoming or two-way. Only TN2140 ports receive this timer.
Valid entries
500 to 1200 in
increments of
100
Incoming Glare Guard (msec)
This field only appears when the trunk group Direction field is two-way.
Valid entries
100 to 25500 in
increments of
100
1598 Administrator Guide for Avaya Communication Manager
Usage
Enter the minimum valid duration of a disconnect signal
for an incoming call. Avaya Communication Manager
will not recognize shorter disconnect signals. This field
cannot be blank. For Brazil pulsed E&M signaling, use
600.
Usage
Enter the duration of the backward release signal your
server running Communication Manager sends at the
end of an incoming call.
Usage
Enter the minimum interval that must elapse between a
trunk's release from an incoming call and its seizure for
an outgoing call. This field cannot be blank. This delay
gives the far-end time to release all equipment after the
trunk is released.