Avaya Communication Manager Administrator's Manual page 1569

Toll Restricted
Valid entries
y
n
Tip:
To find out what kind of line coding a trunk group member uses, check the Line
Tip:
Coding field on the DS1 Circuit Pack screen for the DS1 port to which the
member is assigned.
Trunk Flash
Trunk Flash enables multifunction telephones on Avaya Communication Manager to access
central office customized services that are provided by servers at the far-end or Central Office
(CO). These central office customized services are electronic features, such as conference and
transfer, that are accessed by a sequence of flash signal and dial signals from the
Communication Manager telephone on an active trunk call.
Valid entries
y/n
Trunk Gain
This field specifies the amplification applied to the trunks in this group. With the values of the
Trunk Termination and Country fields, the value in this field also determines the input and
trans-hybrid balance impedance for TN465B, TN2146, TN2147, and TN2184 ports. All other
CO and DID circuit packs are set automatically to high
Valid entries
high
low
Usage
Enter y to prevent toll-restricted users from using a trunk
access code to make restricted outgoing calls over this
trunk group.
Enter n if the field is automatic or if you don't want to
restrict access.
Usage
Enter y to allow trunk flash.
Usage
Enter high if users complain of low volume.
Enter low if users complain of squeal or feedback.
Trunk Group
Issue 1 June 2005 1569