Avaya Communication Manager Administrator's Manual page 1410

Screen Reference
Distinctive Audible Alert
Valid entries
y/n
Emergency Location Ext
The Emergency Location Ext field defaults to the telephone's extension. This extension
identifies the street address or nearby location when an emergency call is made. For more
information about the use of this field, see the Usage description for the Remote Softphone
Emergency Calls field later in this section.
Valid entries
1 to 8 digits
Note:
On the ARS Digit Analysis Table screen, you must administer 911 to be call
Note:
type emer or alrt in order for the E911 Emergency feature to work properly.
Endpt ID
Appears only if Endpt Init is y. Enter a unique 2-digit number (00 to 62) for this endpoint. Each
Endpt ID field must have a unique value for each endpoint on the same port.
This field provides for multipoint configuration conformance to the Bellcore Terminal
Initialization procedures. In these procedures, a multipoint configuration requires the last 2
digits of the Service Profile Identifier (SPID) be between 00 and 63 and be binary unique for
each endpoint.
For WorldClass BRI (WCBRI) data modules only, this field, combined with the SPID, gives the
effective SPID administered into the terminal. Bellcore ISDN-1 requires the SPID programmed
into the endpoint contain at least 9 digits. For example, if the SPID is 1234, and Endpt ID is 01,
then the SPID administered on the terminal is 000123401. The three leading zeros are
necessary to create a 9-digit SPID.
1410 Administrator Guide for Avaya Communication Manager
Usage
Enter y so the telephone can receive the 3 different types of ringing
patterns which identify the type of incoming calls.
Distinctive ringing may not work properly for off-premises telephones.
Usage
Enter the Emergency Location Extension for this station.