Avaya Communication Manager Administrator's Manual page 1450

Hide thumbs Also See for Communication Manager:
Table of Contents

Advertisement

Screen Reference
Valid entries
y
n
Coverage Of Calls Redirected Off-Net Enabled
This field allows you to enable/disable the Coverage of Calls Redirected Off-Net (CCRON)
feature. This field provides a quick means of disabling this feature if the demand on the call
classifier port resources degrades other services provided by Communication Manager.
To set this field to y, first set the Coverage Of Calls Redirected Off-net field on the
System-Parameters Customer-Options screen to y. The Coverage of Calls Redirected
Off-Net field on this screen must be y to administer this field.
Valid entries
y
n
Disable call classifier for CCRON over ISDN trunks
When a CCRON call routes offnet over ISDN end-to-end facilities, no call classifier is attached
to the call. If, subsequently during the call, an ISDN PROGRESS or ALERT message is
received that indicates that interworking has occurred, a call classifier is normally attached to
the call and assumes precedences over ISDN trunk signalling. This field provides a customer
the means of directing Communication Manager to dispense with the call classifier on
interworked calls and rely on the ISDN trunk signalling messages.
Valid entries
y
n
1450 Administrator Guide for Avaya Communication Manager
Usage
Directs the system to maintain a simulated bridged appearance on
the principal when redirecting to a final off-net coverage point.
Allows the system to drop the SBA on the principal's telephone
when the call redirects off-net at the last coverage point, eliminating
the cut-through delay inherent in CCRON calls, but sacrificing the
principal's ability to answer the call.
Usage
Avaya Communication Manager monitors off-net
coverage/forwarded calls and provides further coverage
treatment for unanswered calls.
Avaya Communication Manager does not monitor
off-net coverage/forwarded calls. No further coverage
treatment is provided if such calls are unanswered.
Usage
Use y to disable the call classifier for CCRON calls over
interworked trunk facilities.
Use n to enable the call classifier for CCRON calls over
interworked trunk facilities.

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents