Avaya Communication Manager Administrator's Manual page 1296

Screen Reference
resend-digit
Communication Manager sends this signal to adjust the outpulsing pointer so that the last digit
can be resent again. This signal is used on DOD calls.
last-digit
Communication Manager sends this signal to adjust the outpulsing pointer so that the last 2
digits can be resent. This signal is used on DOD calls.
last-2-digits
Communication Manager sends this signal to adjust the outpulsing pointer so that the last 3
digits can be resent. This signal is used on DOD calls.
last-3-digits
Communication Manager sends this signal to adjust the outpulsing pointer so that the last 4
digits can be resent. This signal is used on DOD calls.
next-digit
Communication Manager sends this signal to request the next digit. This signal is used on both
DID and DOD calls.
next-ani-digit
Communication Manager sends this signal to request the next ANI digit. This signal is used on
DID and DOD calls.
restart
Communication Manager sends this signal to request the whole digit string again. This signal is
used on DOD calls.
setup-sppath
The CO sends this signal to Communication Manager to set up a speech path. This signal is
used on DOD calls and on DID calls in Belgium.
Group B signals
Group B signals enhance group A signals for backward signaling from the destination end by
providing the status of the called party. In addition, if the originating media server or switch uses
group II signals, the destination end answers with group B signals. Group B signals are as
follows:
1296 Administrator Guide for Avaya Communication Manager