Avaya Communication Manager Administrator's Manual page 1623

Type
The Type column appears when the Trunk Type field is blank or cont. The Type column does
not display if the Trunk Type field is dis.
This field specifies the signaling type to be used with TN760B (or later release), TN722 (with
any suffix), TN767, TN2140 (when the Trunk Type field is cont), TN437, TN439, TN464 with
any suffix, or TN458 circuit packs.
!
CAUTION:
Customers should not attempt to administer this field. Please contact your Avaya
CAUTION:
technical support representative for assistance.
Valid entries
t1-stan
t1-comp
t5-rev
type-5
Related topics
See Tips for Working with Trunk Groups
trunk groups.
See "Trunks and Trunk Groups" in Feature Description and Implementation for Avaya
Communication Manager, 555-245-205, for more information on all types of trunk groups
except ISDN.
See "ISDN Service" in Feature Description and Implementation for Avaya Communication
Manager, 555-245-205, for more information.
Usage
t1-stan (DEFINITY, S8700 Series IP-Connect)
t1-comp (DEFINITY, S8700 Series IP-Connect)
(DEFINITY, S8700 Series IP-Connect) The value of t5
rev is allowed only for the TN760D vintage 10 or later.
When Type is t5 rev, Mode must be e&m.
type-5 (DEFINITY, S8700 Series IP-Connect)
on page 419 for instructions on adding and managing
Trunk Group
Issue 1 June 2005 1623