Avaya Communication Manager Administrator's Manual page 1034

Screen Reference
Note:
The PMS interface supports 3-, 4-, or 5-digit extensions, but prefixed extensions
Note:
do not send the entire number across the interface. Only the assigned extension
number is sent. Therefore, you should not use prefixed extensions for numbers
that are also going to use the Digit to Insert/Delete function.
Valid entries
0 to 9
Display Room Information in Call Display
This indicates the type of guest room information displayed on telephone displays.
Valid entries
y
n
Dual Wakeup
Valid entries
y/n
Extension to Receive Failed Wakeup LWC Messages
This indicates where unsuccessful wakeup LWC messages will be stored. This is usually
administered to an unassigned extension (cannot be a VDN extension) or to the attendant
(attd). In addition, a LWC lamp for that extension is usually assigned to the attendant console as
an indication of failed wakeup calls.
1034 Administrator Guide for Avaya Communication Manager
Usage
Enter the leading digit that may be deleted and inserted
back as described in the following text.
Usage
If this field is set to y, the phones will display the name
and room number. The extension number and room
number are not always the same number.
If this field is set to n, the phones will display the name
and extension number.
Usage
Enter y if each extension can request two wakeup calls
within one 24-hour time period.
Valid entries Usage
Unassigned Enter the extension where unsuccessful
extension wakeup LWC messages will be stored.