Avaya Communication Manager Administrator's Manual page 1355

Valid entries
','
+
%
!
&
p
ITC (Information Transfer Capability)
Use Information Transfer Capability (ITC) to identify the type of data transmission or traffic that
this routing preference can carry. The ITC applies only to data calls (BCC 1 through 4).
This field must be unre or both if the BCC is y and the BCC value is W
Valid entries
both
rest(ricted)
unre(stricted)
Usage
Use 2 places. Creates a 1.5 second pause between digits
being sent. Do not use as the first character in the string
unless absolutely necessary. Misuse can result in some
calls, such as Abbreviated Dialing or Last Number Dialed,
not completing.
Wait for dial tone up to the Off Premises Tone Detection
Timer and then send digits or intercept tone based on Out
Pulse Without Tone y/n on the Feature-Related System
Parameters screen.
Start End-to-End Signaling.
Wait for dial tone without timeout and then send DTMF
digits.
Wait for ANI (used for Russian pulse trunks)
The associated trunk group must be of type sip. Enter the
single digit p for fully qualified E.164 numbers. The p is
translated to a + and is prepended to the digit string.
Usage
Calls from restricted and unrestricted endpoints can
access the route pattern.
Calls from restricted endpoints can access the route
pattern.
Calls from unrestricted endpoints can access the route
pattern.
Route Pattern
2 of 2
Issue 1 June 2005 1355