Avaya Communication Manager Administrator's Manual page 1285

Truncate Station Number in ANI
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
Valid entries
beginning
ending
no
INCOMING / OUTGOING
ANI Available
Valid entries
1 to 15 or blank
ANI Not Available
You must enter a value if the ANI for PBX field is blank.
Valid entries
1 to 15 or blank
Usage
This field defines the side of the extension number from
which to truncate when station ANI is sent to the CO
and the combined length of the ANI prefix and extension
number is greater than Number of Outgoing ANI Digits.
The ANI prefix (either MFC or COR) is not truncated.
There is no effect if ANI for PBX is sent.
Usage
Enter the number of incoming and outgoing ANI-Available
signals.
Usage
Enter the number of the incoming and outgoing
ANI-Not-Available signals.
Communication Manager outpulses the End-of-Dial
backward signal when the ANI-Not-Available forward
signal is received on incoming calls. Communication
Manager outpulses the ANI-Not-Available forward signal
to the CO on outgoing calls where ANI is not possible.
Multifrequency-Signaling-Related Parameters
Issue 1 June 2005 1285