Avaya Communication Manager Administrator's Manual page 1560

Screen Reference
Numbering Format
This field appears if the Send Calling Number field is y or r or the Send Connected Number
field is y or r. This specifies the encoding of Numbering Plan Indicator for identification purposes
in the Calling Number and/or Connected Number IEs, and in the QSIG Party Number. Valid
entries are public, unknown, private, and unk-pvt. Public indicates that the number plan
according to CCITT Recommendation E.164 is used and that the Type of Number is national.
Unknown indicates the Numbering Plan Indicator is unknown and that the Type of Number
is unknown. Private indicates the Numbering Plan Indicator is PNP and the Type of Number
is determined from the ISDN Private-Numbering screen. An entry of unk-pvt also determines
the Type of Number from the ISDN Private-Numbering screen, but the Numbering Plan
Indicator is unknown.
Outgoing Dial Type
This field sets the method used to transmit digits for an outgoing call. Usually, you should match
what your central office provides. See "Trunks and Trunk Groups" in Feature Description and
Implementation for Avaya Communication Manager, 555-245-205, for more information. This
field appears for Access, APLT, CO, DIOD, DMI-BOS, FX, RLT, and WATS trunk groups. It also
appears for Tie trunk groups when the Trunk Signaling Type field is blank, cont, or dis.
DIOD trunks support pulsed and continuous E&M signaling in Brazil and discontinuous E&M
signaling in Hungary.
Valid entries
tone
rotary
r1mf
1560 Administrator Guide for Avaya Communication Manager
Usage
Enter tone to use Dual Tone Multifrequency (DTMF) addressing, also
known as "touch tone" in the U.S. Entering tone actually allows the
trunk group to support both DTMF and rotary signals.
For pulsed and continuous E&M signaling in Brazil and for
discontinuous E&M signaling in Hungary, use tone or mf.
Enter rotary if you only want to allow the dial pulse addressing method
used by non-touch tone phones. If you have a full touch tone system
internally and a connection to a central office that only supports rotary
dialing, for example, it would be appropriate to enter rotary.
Enter r1mf for CAMA trunk groups. It is the only outgoing dial type
allowed on CAMA trunk groups.
Enter r1mf to allow Russian MF Packet Signaling on outgoing trunks.
Russian MF Packet Signaling carries calling party number and dialed
number information. Group type field must be set to co.
1 of 2