Avaya Communication Manager Administrator's Manual page 1404

Screen Reference
Conf/Trans On Primary Appearance
This field controls whether a DCP or 46xx station permits transfer and conference.
Valid entries
y
n
Configuration Set
This field is used to administer the Configuration Set number that contains the call treatment
options desired for the XMOBILE station. This field must be administered if:
The XMOBILE Type field is EC500.
●
The Mobility Trunk Group field is a trunk group number and the administered trunk group
●
is non-DECT or non-PHS.
The Mobility Trunk Group field is aar or ars.
●
If the Mobility Trunk Group field is a trunk group number and the administered trunk group is
DECT or PHS, this field may be left blank.
Valid entries
1 to 10 or blank
COR
Enter a Class of Restriction (COR) number to select the desired restriction.
Cord Length
Enter a number to specify the length of the cord attached to the receiver. This is a free-form
entry, and can be in any measurement units.
COS
Enter the desired Class of Service (COS) number to select allowed features.
1404 Administrator Guide for Avaya Communication Manager
Usage
The primary call appearance is activated for a transfer or
conference.
An idle bridge appearance is used for a transfer or
conference.
Usage
Enter any value corresponding to the appropriate
Configuration Set screen.