Avaya Communication Manager Administrator's Manual page 1395

Active Station Ringing
Defines how call rings to the telephone when it is off-hook. This field does not affect how calls
ring at this telephone when the telephone is on-hook.
Valid entries
continuous
single
if-busy-single
silent
Adjunct Supervision
Adjunct Supervision appears when the Type field is 500, 2500, k2500, 8110, ops, ds1fd,
ds1sa, VRU, VRUFD, or VRUSA.
Valid entries
y
n
Usage
Enter continuous to cause all calls to this telephone to
ring continuously.
Enter single to cause calls to this telephone to receive
one ring cycle and then ring silently.
Enter if-busy-single to cause calls to this telephone to
ring continuously when the telephone is off-hook and
idle and calls to this telephone to receive one ring cycle
and then ring silently when the telephone is off-hook
and active.
Enter silent to cause all calls to this station to just ring
silently.
Usage
Enter y if an analog disconnect signal is sent
automatically to the port after a call terminates. Analog
devices (such as answering machines and
speakerphones) use this signal to turn the devices off
after a call terminates.
Set this field to n so hunt group agents are alerted to
incoming calls. In a hunt group environment, the
disconnect signal blocks the reception of zip tone and
incoming call notification by an auto-answer station
when a call is queued for the station.
Station
Issue 1 June 2005 1395