Avaya Communication Manager Administrator's Manual page 1144

Screen Reference
Valid entries
PMS_LOG
SAT
SYS_PRINT
IP Services screen - Session Layer Timers page
Use this screen to enable reliable protocol for TCP/IP links, and to establish other session-layer
parameters. This screen only appears if you enter CDR1, CDR2, PMS_JOURNAL, or
PMS_LOG in the Service Type field on page 1 or 2.
Figure 394: IP Services screen - Session Layer Timer page
change ip-services
Service
Type
CDR1
Connectivity Timer
1144 Administrator Guide for Avaya Communication Manager
Usage
Use this to connect the PMS log printer over a TCP/IP link.
System administration terminal.
Use this to connect the system printer over a TCP/IP link.
Reliable Packet Resp
Protocol Timer
y 3
Valid entries Usage
1 to 255 Indicates the amount of time (in seconds) that
the link can be idle before Communication
Manager sends a connectivity message to
ensure the link is still up.
SESSION LAYER TIMERS
Session Connect
Message Cntr
1
2 of 2
Page 3 of x
SPDU Connectivity
Cntr Timer
1 1