Avaya Communication Manager Administrator's Manual page 1551

Expected Digits
Note:
Set this field to blank if the Digit Treatment field is set to insert and the Digits
Note:
field contains a feature access code (for example, AAR or ARS) followed by
digits. In this case, the number of digits expected are set on the AAR and ARS
Digit Analysis Table and AAR and ARS Digit Conversion Table.
Valid entries
1 to 18
Extended Loop Range
This field appears only for a DID trunk group and is used only with the TN459A circuit pack.
Valid entries
y/n
Group Name
Valid entries
1 to 27
characters
Note:
For 4620SW or 4610SW telephones, the Group Name field is supported by
Note:
Unicode language display. For more information on Unicode language display,
see
Usage
Enter the number of digits that the far-end media server
or switch sends for an incoming connection. If your end
is absorbing digits on this trunk group, the entry in this
field must be larger than the entry in the Digits field.
If you leave this field blank, you cannot administer digit
absorption.
Usage
Enter y or n depending on the distance between the
central office and your server. If greater than the
required distance, then the field should be y.
Usage
Enter a unique name that provides information about the
trunk group. Do not use the default entry or the group
type (DID, WATS) here. For example, you might use
names that identify the vendor and function of the trunk
group: USWest Local; Sprint Toll, etc.
Administering Unicode display on page 181.
Trunk Group
Issue 1 June 2005 1551