Avaya Communication Manager Administrator's Manual page 1556

Screen Reference
Incoming Destination
Use this field to set the destination for all incoming calls on trunk groups such as CO, FX, and
WATS that must terminate at a single destination. The destination you enter here is also the
default night service destination unless you enter a different destination in the Night Service
field. Appears when the Direction field is incoming or two-way.
Valid entries
blank
an extension
number
attd
1556 Administrator Guide for Avaya Communication Manager
Usage
Leave this field blank if the Trunk Type (in/out) field is
not auto/....
Calls go to the extension you enter. You may enter any
type of extension, though typically the extension entered
here identifies a VDN, a voice response unit, or a voice
messaging system. Night service overrides this setting
when it's active.
Note:
If entering a Multi-Location Dial Plan
Note:
shortened extension, note the following:
When entering a Multi-Location Dial
Plan shortened extension in a field
designed for announcement extensions,
certain administration end validations
that are normally performed on
announcement extensions are not done,
and resultant warnings or submittal
denials do not occur. The shortened
extensions also do not appear in any
display or list that shows announcement
extensions. Extra care should be taken
to administer the correct type of
announcement for the application when
assigning shortened extensions..
Calls go to the attendant and are recorded as Listed
Directory Number (LDN) calls on call detail records.