Avaya Communication Manager Administrator's Manual page 1594

Screen Reference
Time (sec) to Drop Call on No Answer
This field appears if the Group Type field is co or diod and the Outgoing Dial Type field is mf,
or if the Group Type field is co, diod, fx, or wats and the Country field is 15.
Valid entries
0 to 1200
Used for DCS
Valid entries
y/n
Note:
This field cannot be activated if the trunk group number is greater than 255 or if
Note:
the Trunk Access code is more than 3-digits long.
If this field is y, you can administer ISDN-BRI trunk groups unless the DCS Signaling field is
d-chan. In that case, remove the BRI trunks or set the DCS Signaling field to bx.25 before
submitting the screen.
Field descriptions for Administrable Timers page
This screen may not appear for all trunk group types. The figure below is only an example, and
is intended to show most of the fields that might appear on this page of the Trunk Group
screen. This example may might not show all fields, or might show fields that normally do not
appear together. Your own screen mary vary from this example according to specific field and
system settings. The list of field descriptions that follow the figure is in alphabetical order for
quick reference. This list is intended to be comprehensive, and may include information on
fields that are not shown in the example. The field descriptions identify fields that are specific to
particular trunk group types.
1594 Administrator Guide for Avaya Communication Manager
Usage
Enter the duration (in seconds) Communication
Manager should wait for outgoing calls to be answered.
If the call is not answered in the specified number of
seconds, the call drops. If this field is 0, the timer is not
set and no calls drop.
Usage
Enter y if this trunk group will send and receive
messages on a DCS signaling link.