Avaya Communication Manager Administrator's Manual page 1011

Station Putting Call On Hold
Use this field to control the LED color and flash rate on the 8400 and 6400 series phones for a
call held on a Primary or Bridged Appearance. The LED for the color not selected is turned OFF.
The default values are green and wink.
Valid entries
green or red
off
wink
inverse-wink
flash
flutter
broken-flutter
steady
Station When Call is Active
Use this field to control the red LED on the 8400 and 6400 series phones, for a station active on
a call. The default value is steady.
Valid entries
steady
off
Other Stations When Call Is Put On Hold
Use this field to control LED options for the other stations with a Bridged Appearance that has
been placed on hold (e.g. the user of this station has not pushed the hold button). The default
values are green and wink.
Usage
Indicate whether the LED is green or red.
Select the flash rate for a call on hold.
Usage
When the value is steady, Communication Manager
controls the red LED.
When the value is off, the red LED is always OFF.
Feature-Related System Parameters
Issue 1 June 2005 1011