Isdn Bri National Isdn-1 Call Forward All Calls - Nortel Communication Server 1000S Installation And Configuration Manual

4 Place a voice call to one of the busy ISDN BRI terminals with hunting
enabled. Since the channel type required to handle the incoming call type
is busy, hunting is automatically invoked to find an idle DN in the
hunting chain.
The following can occur:
• If the call finds an idle voice ISDN BRI or non-ISDN BRI terminal, it
will ring that terminal.
• If hunting is not successful:
— the originating party receives a busy tone if the total number of calls
on the DSL (as configured on LD 27) exceeds the maximum number
of calls allowed, or
— the call is placed in call waiting if the maximum number of calls on
the DSL is below the specified limit.
• If the call is placed in call waiting, observe the called ISDN BRI
terminal. You should get a visual indication of the next DN and receive
an audible tone.
5 Place the active call on hold and answer the incoming call that is waiting.
6 Complete the incoming call and hang up.
7 Retrieve the call on hold.
8 Release the call connection.

ISDN BRI National ISDN-1 Call Forward All Calls

National ISDN-1 Call Forward All Calls enables a user of an ISDN BRI
terminal to have calls redirected from the user's DN to another DN. Calls are
redirected regardless of the busy or idle status of the interface to the user. Call
Forward is assigned on the basis of the directory number and call type (that
is, the user may have voice calls forwarded, while data calls terminate
normally).
Testing ISDN BRI functions
ISDN Basic Rate Interface
Page 109 of 120
Installation and Configuration