H Programming Special Characters; Single-Line Telephones; Special Characters For Single-Line Telephones - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
H Programming Special Characters

Single-Line Telephones

Programming Special Characters
This appendix provides the special characters used in dialing sequences for
numbers dialed automatically, such as on Auto Dial buttons. The characters
allowed depend on the type of telephone.
Single-Line Telephones
Some dialing sequences need special characters. For example, the user presses
and releases either the Recall or Flash button or the switchhook to insert a Pause
character in a dialing sequence after a dial-out code to allow the system to seize
an outside line/trunk before dialing the number
Table H–1. Special Characters for Single-Line Telephones
Press ...
Recall, Flash,
or switchhook
#
*
Means ...
Pause. Inserts a 1.5-second pause in the dialing sequence.
*
Multiple consecutive pauses are allowed.
End of Dialing. Used to signal the end of the dialing sequence or
to separate one group of dialed digits from another, such as an
account code from a telephone number.
On single-line telephones with positive or timed disconnect (such as the
2500YMGL) the Recall or Flash button, instead of the switchhook, must be
used.
H
H
H
Issue 1
February 1998
Page H-1