Timers And Counters - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
PRI Facilities
Summary: Timers and Counters
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Table 4–2.

Timers and Counters

Timer/Counter Purpose
T200 Timer Maximum response time
T203 Timer Maximum time
N200 Counter Maximum transmissions
N201 Counter Maximum octets
K Counter Maximum outstanding
I-frames
T303 Timer Set up timeout
T305 Timer Disconnect timeout
T308 Timer Release timeout
T309 Timer Signal loss
T310 Timer Call Proc. timeout
T313 Timer Connect timeout
T316 Timer Restart timeout
System Manager
All
Not required
Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
See Table 4–2
See Table 4–2
No
No
/LQHV7UXQNV 35,
(QWHU
Select timer/counter
Æ È È Ã
(QWHU
and so on
U
I
 Ç Ç Ç Ç
counter +
Factory Setting
1 second
30 seconds
3 transmissions
260 octets
7 frames
4 seconds
4 seconds
4 seconds
90 seconds
60 seconds
4 seconds
120 seconds
4
3URWRFRO 7LPHUV
Drop Dial no. of ms/octets/

([LW ([LW ([LW
Type slot no.
Type no. of ms/octets/and so on
Valid Range
1,000 to 3,000 ms
1 to 60 seconds
1 to 5 transmissions
16 to 260 octets
1 to 15 frames
4 to 12 seconds
4 to 30 seconds
4 to 12 seconds
30 to 120 seconds
2 to 120 seconds
4 to 60 seconds
30 to 120 seconds
Issue 1
February 1998
Page 4-199
Dial slot no.
([LW
Select timer/