Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 742

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Extensions
NOTES:
1. Be sure to restore the board after finishing any programming activities.
2. If the primary and secondary cover buttons are not removed, the
Summary: CTI Link
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure Busy out the board first. This is a Maintenance step. Start the
following message appears on the programming device (SPM or
MLX-20L).
System Manager
Hybrid/PBX
Not required
Form 2b, System Numbering: Digital Adjuncts
No port programmed as CTI link
Any extension on an MLX port board except the System
Programming console port and the first and fifth ports.
Yes
No
procedure from the main menu, not the System Programming
screen.
Menu
Program the CTI link:
Restore the slot. This is a Maintenance step. Start the
procedure from the main menu, not the System Programming
screen.
Menu
4
Dial the slot no.
Dial extension no.
Dial the slot no.
Issue 1
February 1998
Page 4-272