Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 756

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Optional Extension Features
Remote Call Forwarding
Use this procedure to allow or disallow the Remote Call Forwarding capability,
which permits users to forward calls to an outside number. In Release 6.0 and
later systems, Remote Call Forwarding must be enabled in order for an extension
user to activate Centrex Transfer via Remote Call Forwarding. In a Release 6.0 or
later private network, Remote Call Forwarding may be used to forward calls
across the network.
If an extension with Remote Call Forwarding has one or more personal lines
assigned, that extension can be assigned as the principal user, and calls received
on that line are forwarded to outside numbers. See
Line" on page 51.
NOTE: NOTE: NOTE:
This feature is not recommended unless you have ground-start trunks. See
"Disconnect Signaling Reliability" on page 4–42 and "Hold Disconnect
Interval" on page 4–47.
!
SECURITY ALERT
See "Security of Your System: Preventing Toll Fraud" on page A–9 in
Appendix A for more information and security procedures on preventing toll
fraud with Remote Call Forwarding.
Summary: Remote Call Forwarding
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
:
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
Disallowed
Disallowed, allowed
Yes
4
"Principal User for Personal
4
Issue 1
February 1998
Page 4-286