Maintenance Alarms - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Extensions

Maintenance Alarms

Use this procedure to identify the line/trunk jack that connects an external alerting
device that sounds or flashes when major maintenance problems occur.
You cannot assign the line/trunk identified for the maintenance alarm to a button
on any telephone or as a Remote Access trunk, and you cannot use its line/trunk
jack to connect a loudspeaker paging system or Music on Hold.
Summary: Maintenance Alarms
Programmable by
Mode
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Maintenance Alarms
Console Display/Instructions
Select the Auxiliary Equipment menu.
! 
System Manager
All, but in Hybrid/PBX mode, the line/trunk designated for the
maintenance alarm cannot be assigned to a line/trunk pool.
Idle ConditionSystem idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk number
No
No
 Æ
Type line/trunk no.
Additional Information
4
4
Dial line/trunk no.
 Ç Ç
4
Issue 1
February 1998
Page 4-265
PC