Digit Absorption - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Automatic Route Selection
Console Display/Instructions
Enter the restriction level ( n = 0 to 6).
! 
Continue to enter FRL for another pool route or go to Step 5.
! 
Select .
Save your entry.
! 
(QWHU
Select .
Return to the System Programming menu.
! 
([LW
Select twice.

Digit Absorption

Use this procedure to specify how many of the digits dialed (0 through 11) by the
caller should be absorbed (not sent to the telephone company's central office) by
the system when a call is made on an identified route.
Entries of 1 through 11 indicate that the system should not send the specified
number of digits, starting with the first digit dialed by the user after the dial-out
code.
Digit absorption is assigned to Tables 1 through 18.
Additional Information
xx = table number entered in Step 1
x = route number entered in Step 1
Dial or type [ n ].
Return to Step 3. The next route is
displayed on Line 1.
4
Issue 1
February 1998
Page 4-382
PC
Ã

ÇÇ