Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 802

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
System Features
Host System Dial Codes for Behind Switch Mode
Use this procedure to assign the host system dial codes for the Transfer,
Conference, and Drop features.
When multiline telephone users press the Transfer, Conference, or Drop button,
a signal is sent to the host service and the communications system features are
not accessed. Assigning dial codes to these features ensures that users can take
advantage of them through the host system.
NOTE: NOTE: NOTE:
This procedure applies to Behind Switch mode only.
Summary: Host System Dial Codes for Behind
Switch Mode
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
Behind Switch
Not required
Form 1, System Planning
No host dial codes are assigned
Host system dial code of up to 6 digits
No
No
More
É  Ä
Drop Dial host system dial code
Select feature
Type host system dial code
4
4
Select feature
U
I
 Ç Ç
+
Issue 1
February 1998
Page 4-332