Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 616

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
DID Trunks
Single Line Procedure
Console Display/Instructions
Specify entry mode.
! 
Select
Enter the trunk number.
! 
Y
Assign or remove the trunk.
! 
Select
Continue to enter trunks for the other trunk block or go to Step 5.
! 
Select .
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select three times.
.
or
.
Additional Information
x = block entered in Step 4
Dial or type [ nnn ].
You may continue to assign or remove DID
trunks from the block by repeating Steps 2 and 3.
Return to Step 2. The block is
displayed on Line 1.
Issue 1
February 1998
Page 4-146
PC
È
Ã




ÇÇÇ