Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 755

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Optional Extension Features
Authorization Codes
Use this procedure to assign an authorization code to an extension. The
authorization code can range from 2 to 11 characters (0 - 9, ) and must be
unique for each extension. An authorization code cannot begin with an " ."
NOTE: NOTE: NOTE:
In Release 6.0 and later systems, a user can activate Call Forwarding and
Remote Call Forwarding by entering his or her home extension
authorization code while at any telephone in the system; this is useful when
activating Call Forwarding or Remote Call Forwarding at phantom stations.
It is also useful when a single-line telephone extension needs a PAUSE
character in the Remote Call Forwarding digit string.
If you are assigning authorization codes for a group of sequential extensions,
begin programming the lowest extension number to take advantage of the
screen key (see "Standard Procedures").
Summary: Authorization Codes
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
All
Not required
Form 6h, Authorization Codes
Not assigned
2 - 11 characters (0–9, )
Yes
No
More
È  
Dial authorization code
Type ext. no.
Type authorization code
4
4
Dial ext. no.

 Ç Ç
Issue 1
February 1998
Page 4-285