Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 729

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Extensions
Analog Multiline Telephones with Voice
Announce to Busy
Use this procedure to dedicate a voice or voice pair to provide the Voice
Announce to Busy feature on an analog multiline telephone.
The extension number associated with the first (odd-numbered) extension jack in
the pair is the telephone's extension number. The extension number for the
second (even-numbered) extension jack is dedicated to the Voice Announce to
Busy feature. Calls cannot be placed to the extension jack reserved for the Voice
Announce to Busy feature.
Voice Announce to Busy must be disabled at data workstations.
NOTE: NOTE: NOTE:
This procedure does not apply to MLX telephones (Voice Announce to Busy
is automatically provided) and cannot be programmed for single-line
telephones.
Summary: Analog Multiline Telephones with
Voice Announce to Busy
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
NOTE: NOTE: NOTE:
"Data Features" on page –431
telephones in data workstations.
System Manager
All
System idle
Form 4b, Analog Multiline Telephone
Form 5a, Direct-Line Console (DLC)
Analog Data Form 1a, Modem Data Workstation
Not applicable
Extension numbers
Yes
Yes
È 
Type ext. no.
provides information about analog multiline
4
4
Dial ext. no.
 Ç Ç
Issue 1
February 1998
Page 4-259