Recording System Operating Conditions; Programming Equipment - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
2 Control Unit Configuration

Recording System Operating Conditions

Recording System Operating
Conditions
This section contains instructions for recording the following system operating
conditions:
Programming equipment that will be used and its extension jack
assignment
Mode of operation
Language choice
Enable and disable Automatic Maintenance Busy
A reminder to set the system date
Backup schedule
Identifying system console extensions
Second Dial Tone Timer
Identifying system applications
Forms Needed
Form 1, System Planning

Programming Equipment

Two types of equipment can be used for system programming:
An MLX-20L telephone identified as a system programming console. The
telephone is connected to the first (lowest) extension jack (which is
factory-set for system programming) on the first MLX module.
A personal computer (PC) with System Programming and Maintenance
(SPM) software. The PC connects to the lowest jack on the processor
module.
Planning Form Instructions
1. Under the Programming Equipment heading in the System Operating
Conditions section on Form 1 (page 2), do one of the following:
If the system will use a system programming console, check System
Programming Console. Proceed to Step 2.
If the system will use a PC with SPM software, check the PC with
SPM Software box and skip to the next section,
2
2
''System
Issue 1
June 1997
Page 2-7
Mode''.