Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 820

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Remote Access Features
Allowed or Disallowed Lists Procedure
Console/Display Instructions
Enter the list you want to assign ( n = 0 to 7).
! 
ÃSr€‚‡rÃ6ppr††)
@‡r…ÃÃGv†‡Ã
hppr††Ã&
7hpx†ƒhpr
@‘v‡
Assign or remove the list.
! 
(QWHU
Select
'HOHWH
Return to the System Programming menu.
! 
([LW
Select three times.
Remote Access Barrier Codes
Use this procedure to establish or remove barrier code requirements as well as to
establish or remove the barrier codes themselves.
Barrier codes are security passwords that restrict users from making unauthorized
remote access calls on tie and non-tie lines and trunks. Callers are allowed three
attempts per call to enter the correct remote access barrier code. If the caller
enters an incorrect barrier code or times out during code entry, the caller hears the
retry tone. The caller can erase an entered code by dialing ** (two asterisks).
Code erasure is counted as one of the three permitted attempts. After three
unsuccessful attempts, the caller hears a reorder tone and the call is
disconnected. If this happens, the SMDR contains sixteen 0s in the Account Code
field to flag the three failed attempts.
A maximum of 16 barrier codes are allowed for all lines/trunks. Each of the 16
barrier codes may be programmed with its own class of restriction (COR).
9ryr‡r
@‡r…
or
.
Additional Information
= option name selected in Step 3
= option name selected in Step 5
Dial or type [ n ].
4
Issue 1
February 1998
Page 4-350
PC
Ã

ÇÇÇ