Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 775

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Optional Group Features
Group Calling Line/Trunk or Pool Assignments
Use this procedure to assign or remove lines, trunks, or pools (Hybrid/PBX only)
that ring directly into a calling group.
Incoming calls on each line/trunk or pool can be directed to only one calling group.
To reassign a line/trunk or pool to a new calling group, you must remove it from its
old group before making the new assignment.
Summary: Group Calling Line/Trunk or Pool
Assignments
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
All
Not required
Form 7d, Group Calling
Not applicable
Line, trunk, or pool number
Yes
No
More
Dial calling group ext. no.
È  Æ 

Type line/trunk no.
4
4
Dial line/trunk no.
 Ç Ç Ç
Type calling group ext. no.
Issue 1
February 1998
Page 4-305