Signaling Mode - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
DS1 Facilities
Console/Display Instructions
Select Suppression.
! 
9T ÃTy‚‡ÃYY
Select AMI zero code suppression or bipolar 8 zero substitution.
! 
YY
Save your entry.
! 
(QWHU
Select .
Return to the System Programming menu.
! 
([LW
Select twice.

Signaling Mode

Use this procedure to specify the signaling for the 100D module as robbed-bit or
common-channel signaling.
NOTE: NOTE: NOTE:
This procedure is needed only for T1 facilities; common-channel signaling
is set automatically for PRI facilities.
Summary: Signaling Mode
Programmable by
Mode
Idle Condition
Planning Form
Additional Information
xx = slot number entered in Step 3
xx = slot number entered in Step 3
Select
.
System Manager
All
100D module idle
Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
or
4
4
Issue 1
February 1998
Page 4-114
PC
Å
Ã
Ä
ÇÇ