Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 1007

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
D General Feature Use and Telephone Programming
Telephone Programming
Table D–4. Continued
Step
4 Select the feature.
If the feature name is on the
display:
If the feature name is not on the
display:
To move through the list of
features page by page,
or
To jump to the screen that
displays the feature name.
5 Respond to any additional
prompts on the display.
6 End programming.
To return to the Home screen:
To return to the Menu screen:
NOTE: NOTE: NOTE:
MLX display telephones can also be programmed using the method
described for MLX-10 and MLX-5 nondisplay telephones. For example, the
programming mode can be entered by pressing the Feature button and
dialing
process. Or, enter programming by using the display and then dial a
programming code to select the feature rather than selecting it from the
display.
Action
Press the button next to or below the name of the
feature to be programmed.
Press More.
Press More.
Select
Select the range of letters from the display that
corresponds to the first letter of the feature name (for
example, it the feature begins with , select
If the feature is not displayed on the page that you
jumped to, press More.
When you find the feature you want, press the
button next to or below it.
Select the appropriate prompt (for example, select
or
enter required information (for example, dial a phone
number for Auto Dial).
Select
Press Home or lift and replace the handset.
Press Menu.
, then referring to the display to continue the programming
from the display.
to turn inside Coverage on or off), and/or
.
Issue 1
February 1998
Page D-15
).