Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 599

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Tie Trunks
Console/Display Instructions
Save your entry.
! 
Select .
Specify the type of signaling for the trunk.
! 
U…ˆxÃYYY
Continue to assign E&M signaling to another trunk or go to Step 8.
! 
Select .
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select twice.
Dial Mode
Use this procedure to specify whether an incoming or outgoing tie trunk is touch-
tone or rotary.
Touch-tone cannot be programmed for incoming immediate signaling tie trunks.
Users of touch-tone single-line telephone cannot make calls by using individual
trunks programmed for rotary operation. The touch-tone signals generated from
the telephone while the user is dialing are transmitted to the central office at the
same time the rotary signals are sent to the system. The central office receives
both signals and cannot process the call.
Additional Information
xxx = trunk entered in Step 4
Select
,
, or
.
Return to Step 6. The next trunk is
displayed on Line 1.
4
Issue 1
February 1998
Page 4-129
PC
Ã
Ä
Å


ÇÇ