Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 815

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Remote Access Features
Console Display/Instructions
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select twice.
Remote Access without Barrier Codes
Use this procedure to change the class of restriction for one of the following:
All non-tie lines/trunks
All tie trunks and DID trunks with Remote Access
DID remote access code
!
SECURITY ALERT
Your system will be highly susceptible to toll fraud if you activate the Remote
Access feature without barrier codes. Lucent Technologies does not
recommend doing this except in cases where your remote-access trunks
are being used by external users connected to a system that is in a private
network with your own (Release 6.0 and later). Even in these cases, the lack
of barrier code poses a risk of toll fraud. Be sure that the remote system
manager assigns any necessary restrictions.
NOTE: NOTE: NOTE:
If barrier code requirements have been established for remote access
users, use
procedure.
The class of restriction assigned may be one of the following:
Restriction. Determines whether remote access users can make local
and/or toll calls and includes the following settings:
:
"Remote Access with Barrier Codes" on page –357
— Unrestricted
— Toll restricted
— Outward restricted
Additional Information
4
Issue 1
February 1998
Page 4-345
PC

ÇÇ
and not this