Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 757

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Optional Extension Features
Copy Option
Console Procedure
PC Procedure
Delayed Call Forwarding
Delayed Call Forwarding allows users to answer or screen a call arriving at their
extension before the call is forwarded by the Forwarding, Remote Call
Forwarding, or Follow Me features. The forwarding delay is the amount of time
between the arrival of the call at an extension and the time the call is forwarded.
This delay is measured in rings and can range from 0 to 9 rings. With the delay
ring set to 0, the call is forwarded immediately. Delayed Call Forwarding is only
available in Release 4.0 and later.
NOTE: NOTE: NOTE:
When Do Not Disturb is activated at an extension it overrides Delayed Call
Forwarding and the call is forwarded immediately.
Use this procedure to assign or remove Delayed Call Forwarding from an
extension. If you are assigning Delayed Call Forwarding to a group of sequential
extensions, begin programming the lowest extension number to take advantage of
the screen key (see "Standard Procedures").
Summary: Delayed Call Forwarding
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
No
More
È  
Dial ext. no.
 Ç Ç
Toggle letter
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
0 rings
0 - 9 rings
Yes
Toggle LED On/Off or
On/Off or type ext. no.
4
4
Issue 1
February 1998
Page 4-287