Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 654

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
PRI Facilities
Console Display/Instructions
Repeat Steps 5 through 7 of the main procedure for each
! 
miscellaneous service group number.
Return to the System Programming menu.
! 
Select four times.
‹
DMS-100 Local Procedure
Console Display/Instructions
Specify a DMS-100 local service.
! 
78uhryÃB…‚ˆƒÃ‘Y
Continue to specify DMS-100 local service for another B-channel group or go to
! 
Step 3.
Select .
LEGEND UDP Procedure
Console Display/Instructions
The LEGEND UDP service is already specified for you.
! 
Return to the System Programming menu.
! 
Select four times.
Additional Information
Additional Information
xx = number entered in Step 5
Press the button or function key next to
your selection.
Return to Step 1. The next B-channel group
number is displayed on Line 1.
Additional Information
Y
xx = number entered in Step 5, main
procedure.
Select
February 1998
Page 4-184
ÇÇÇÇ
.
ÇÇÇÇ
Issue 1
PC
PC
Ã

PC
Ã