Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 777

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Optional Group Calling Features
Summary: Hunt Type
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Group Calling Delay Announcements
Use this procedure to designate the announcement devices used to play
messages to callers while they are waiting in the queue.
Two announcement devices can be designated for each calling group; however,
more than one calling group can use the same announcement device. The
extensions to which the delay announcement devices are connected should not
be programmed as a calling group member.
If the extension jack or MFM was previously programmed as a regular extension,
you must remove all line/trunk button assignments before you designate the
extension jack as a delay announcement device.
NOTE: NOTE: NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), a delay
announcement device must be in the local system, not in a remote
networked system.
System Manager
All
Not required
Form 7d, Group Calling
Circular hunting pattern
Circular, Linear
No
No
More
Dial calling group ext. no.
È  Æ Ã
 Ã Ä Å  Ç Ç Ç
or or
4
Type calling group ext. no.
4
Issue 1
February 1998
Page 4-307
, , or